Mountain Grout Acrylate


GM: Acrylate (Made in America)

Mountain Grout: Acrylate

Acrylate Product Description:

Acrylate is a fast-reacting, low viscosity, polymer used to seal water leaks in concrete structures and to stabilize soils. This product utilizes environmentally safe acrylic resins in conjunction with catalysts and accelerators. The system is typically pumped at a ratio of 1:1 when controlling active water leaks and at higher ratios with water when ultra-low viscosity is needed to penetrate fine soil particles. At a 1:1 ratio, the resulting product is a flexible elastomer. At a higher ratio of water to resin, a pliable gel results. For specific mix ratios for fine soils please contact Green Mountain International, Technical Services Department.

 

Typical Acrylate Application:

Acrylate is typically used to seal any leak below grade. The acrylate product is used extensively in tunnels of all types, below-grade parking garages, foundations, tanks, sewers, shafts and around large diameter pipes, cracked concrete and various failed construction joints.

 

Acrylate Advantages:

  • Non-hazardous shipping
  • Non-flammable
  • Non-hazardous when cured
  • Super-low viscosity
  • Easy clean-up
  • Reaction is site “adjustable”
  • Economical
  • 100% Made in America

 

Packaging Sizes Available for Acrylate:

Acrylate is supplied in 275 gallon totes, 55 gallon drums, and 5 gallon pails. The accelerator and catalyst are supplied in plastic containers filled by weight as required.

Acrylate materials should be stored above 40 degrees fahrenheit and below 80 degrees fahrenheit in plastic (or stainless steel) containers at all times and must be kept separated prior to use. All equipment usedto pump the product must be designed specifically for this acrylic formulation. Use only stainless steel pumps and equipment due to the corrosive nature of the materials. Do not use aluminum components. SP and TEA components may form a toxic gas if mixed prior to field application. Follow manufacturer’s instructions carefully during mixing and application. Always wear protective clothing in accordance with current OSHA requirements. Avoid skin and eye contact. Do not ingest. Do not mix SP and TEA exclusively from other components.

For more information on our Acrylate or full line of Polyurethane products please call (800) 942-5151.